You have no items in your shopping cart.
Syringe 10ml - Luer Lock combi
Start your sterile inoculation workflow with one trusted base. The empty 10 ml Luer Lock syringe is the foundation of DIY mycology — pair it with a 16G or 18G needle and an optional combi-stopper using the select below.
Availability: In stock In stock
Starting from: €0.50
Up to: €0.95
Product Description
Details
Start your sterile inoculation workflow with one trusted base. The 10 ml Luer Lock syringe is the foundation of any DIY mycology project — empty, sterile-packed, and engineered for precise control. Add a 16G or 18G needle and an optional Luer Lock combi-stopper via the select above to build the exact kit your workflow demands.
Why this combo is the foundation of sterile mycology
When you're working with spore suspensions or liquid cultures, contamination is the enemy. A compromised syringe, a loose needle connection, or a half-used syringe stored badly can undo weeks of substrate preparation. This bundle solves the three weakest links in one purchase: a hospital-grade quality syringe, a Luer Lock needle in the gauge you actually need, and a sterile combi-stopper to keep the syringe usable between sessions.
What's in the bundle, what's optional
| Component | Included | Notes |
|---|---|---|
| Sterile 10 ml Luer Lock syringe | ✓ Included | PP barrel, individually sterile-packed |
| Needle 16G or 18G Luer Lock | Optional — pick via select | Choose gauge for your workflow |
| Luer Lock Combi-Stopper (cap) | Optional — pick via select | Seals syringe between sessions |
Pick your needle gauge — 16G or 18G
The two most common gauges in DIY mycology each have their place. Pick by what you're injecting, not by habit.
| Specification | 16 Gauge | 18 Gauge |
|---|---|---|
| Outer diameter | 1.65 mm | 1.27 mm |
| Inner bore | 1.19 mm | 0.84 mm |
| Typical length | 40 mm (1.5") | 38 mm (1.5") |
| Flow rate | Faster — larger bore | Standard — fine control |
| Best for | Liquid culture, viscous spore suspensions | Spore suspensions, precision injection |
| Clog resistance | Higher | Standard |
Why Luer Lock matters
Slip-tip needles rely on friction alone. Under the pressure of pushing thick spore solution or liquid culture, they can pop off mid-injection — instantly contaminating your work. Luer Lock threads keep the needle locked onto the syringe hub until you deliberately twist it off.
| Aspect | Luer Lock (this product) | Slip tip |
|---|---|---|
| Connection | Threaded — twists securely onto needle hub | Friction-fit only |
| Pressure handling | Withstands viscous-fluid push | Can pop off mid-injection |
| Contamination risk | Lower — sealed during use | Higher — gap between pushes |
| Sterile workflow | Recommended | Not recommended |
The sterile inoculation workflow
A clean, repeatable seven-step process used by most hobby mycologists. Hospital-grade equipment plus disciplined technique gives consistent results.
| Step | Action |
|---|---|
| 1 | Wipe down work surface with 70% IPA. Wash hands. Optional: still air box or glovebox. |
| 2 | Open sterile needle and syringe inside your prepared workspace. |
| 3 | Attach needle to Luer Lock syringe — twist until secure. |
| 4 | Flame-sterilize needle tip until red-hot. Cool ~30 seconds out of contact. |
| 5 | Inject 1–2 ml of spore suspension or liquid culture per inoculation point. |
| 6 | Withdraw needle. For partial use: replace with combi-stopper for sterile storage. |
| 7 | Label substrate with strain, date, volume. Incubate per strain protocol. |
Full specifications
| Spec | Value |
|---|---|
| Volume | 10 ml |
| Connection | Luer Lock (locking, threaded) |
| Barrel material | Polypropylene (PP) |
| Plunger | PE / TPR rubber gasket |
| Graduations | 0.2 ml increments |
| Sterilization | Ethylene Oxide (EO) |
| Packaging | Individually sterile-packed |
| Shelf life | ~3 years (intact packaging) |
| Use | Single-use, hospital-grade quality |
| Origin | Belgium |
Frequently asked questions
| Question | Answer |
|---|---|
| Is this syringe pre-loaded with spores? | No. It is an empty, sterile-packed Luer Lock syringe — you supply your own spore solution or liquid culture. |
| Can I reuse the syringe? | No. All components are single-use to maintain sterility. |
| Which needle gauge should I pick? | 16G for liquid culture and viscous suspensions; 18G for standard spore suspensions and finer control. |
| How long does the sterility last? | Approximately 3 years from manufacture, provided the individual packaging stays intact and dry. |
| Why isn't a needle included by default? | Different mycologists prefer different gauges — pick yours via the select above so you only get what you need. |
| Is this product CE-marked? | Yes — these are CE-marked single-use disposable medical-class devices, hospital-grade quality, sold here for DIY mycology hobby use. |
Responsible sterile practice
These are single-use, individually sterile-packed disposables intended for DIY mycology hobby and research. Always work in a clean environment, flame-sterilize the needle tip before injection, and discard all components after one session. Do not resterilize or reuse.
Additional Info
Additional Info
| Productcode | MCS.BUND.060-SYRILL.10ML-CMBI |
|---|---|
| Weight (KG) | 0.0020 |
| Origin | Belgium |
| Sterile | Yes |
Customer Reviews
1 Item(s)
per page
- Najbolje i najpuzdanije Review by Ivan1488
-
Do sada najbolje iskustvo sa svim naručenim proizvodima top kvalitete (Posted on 6/15/2026)Rating
1 Item(s)
per page
You may also be interested in the following products:
